MSD 85
Re: MSD 85
I've MSD85 MSV90 protocols. When bought I dismounted ECU to flash, but once tried thru OBD socket and it worked out just fine! I'm using OpenPort. After that I do thru OBD and if it doesn't works I disconnect battery for a moment and try again.
BMW /// TUNING OPTIMIZATION PERFORMANCE
-
- Posts: 1
- Joined: Fri Jun 12, 2020 11:02 am
-
- Posts: 20
- Joined: Fri Jun 12, 2020 5:34 pm
Re: MSD 85
Is it possible to turn MSD85 into a BRICK with PID13? for example by flashing wrong software (wrong calibrations or wrong software)
- Thomas TGFlash
- Posts: 10
- Joined: Wed Jun 10, 2020 8:30 pm
Re: MSD 85
No, you can't brick ECU with 013, because only calibration area is flashed. We tested random programming session termination and flashing random data. You still can reflash with 013 after that.RomanKursk wrote: ↑Sun Jun 14, 2020 6:16 pmIs it possible to turn MSD85 into a BRICK with PID13? for example by flashing wrong software (wrong calibrations or wrong software)
Re: MSD 85
I am going to buy a tgflasher for this block, as well as for Bosch blocks. can you say what i need to buy in order to try to read the msd 85 on f01 through the obd, the scanmatik with obd and bench or openport? can in PMThomas TGFlash wrote: ↑Mon Jun 15, 2020 11:12 amNo, you can't brick ECU with 013, because only calibration area is flashed. We tested random programming session termination and flashing random data. You still can reflash with 013 after that.RomanKursk wrote: ↑Sun Jun 14, 2020 6:16 pmIs it possible to turn MSD85 into a BRICK with PID13? for example by flashing wrong software (wrong calibrations or wrong software)
Re: MSD 85
Scanmatick and openport work with that ECU, but not always with OBD, then you must use bench connection, im using https://chiptuningshop.com/product/univ ... out-cable/ thing for bench connection.
Re: MSD 85
Thanks ,https://ecutools.ru/chip-tuning/scanmat ... ash-cable/
Can use this cable ?
Can use this cable ?
Re: MSD 85
YesJackxxx wrote: ↑Tue Jun 16, 2020 9:39 amThanks ,https://ecutools.ru/chip-tuning/scanmat ... ash-cable/
Can use this cable ?
Re: MSD 85
Thanks manAlexGod wrote: ↑Tue Jun 16, 2020 10:05 amYesJackxxx wrote: ↑Tue Jun 16, 2020 9:39 amThanks ,https://ecutools.ru/chip-tuning/scanmat ... ash-cable/
Can use this cable ?
Re: MSD 85
I bought this module, it works great for obd with scanmatik 2 pro