Page 2 of 3
Re: SID 209
Posted: Thu Jun 18, 2020 10:11 pm
by MATUNING
Thanakrit wrote: ↑Wed Jun 17, 2020 1:47 am
IDs you listed are supported. Please contact
[email protected] with *.debuglog from Users/.../Documents/TGFlash/logs.
We do not see any unresolved inquiries at the moment. Please also explain what is "han", we couldn't translate that.
I'm sorry, I mistype "Can't write It damages to the ECU. "
I will send information to
[email protected] To analyze the cause
Were you able to resolve the issue? Can support tell us what was the issue?
Re: SID 209
Posted: Wed Jun 24, 2020 10:33 pm
by rpmremapping
Will also be interested if and how this was resolved
Re: SID 209
Posted: Fri Jun 26, 2020 12:18 pm
by Raf TGFlash
rpmremapping wrote: ↑Wed Jun 24, 2020 10:33 pm
Will also be interested if and how this was resolved
Every individual issue has its own reasons and solutions, so no general answer can be given.
If, for any reason, writing with 019 failed (battery voltage, cable disconnect, whatever else...), you need to perform "Back to stock" with original VBF to return ECU to original state and, after that, start writing with your file again.
Re: SID 209
Posted: Mon Jun 29, 2020 3:15 am
by andi1547
Guys i tried doing a sid 209 in a ford ranger it would id the ecu and i could get a virtual read, but when i tried to read or write to the ecu i got communication error after the part where it attempts to patch the ecu
the details of log is below
[Read] PID: 019 (Ford Siemens Continental SID209 [EB3A/GB3A] TC1797 CAN (BETA))
[15:34:06]: Selected protocol #019.
[15:34:06]: Selected interface: J2534.
[15:34:07]: Connecting...
[15:34:08]: Identify...
VIN: 6FPPXXMJ2PJA53911
ECU: CONTI_SID209_FRY_C00
Serial: 000882790861
Part#: GB3G-12A650-BB
HW: GB3A-12B684-CA
SW#: DS-GB3G-12A650-AAE
SW: GB3G-14C204-AJM
[15:34:11]: ECU isn't patched.
[15:34:12]: Downloading data from server...
Error: Reading from ECU.
Re: SID 209
Posted: Mon Jun 29, 2020 5:29 pm
by AlexGod
andi1547 wrote: ↑Mon Jun 29, 2020 3:15 am
Guys i tried doing a sid 209 in a ford ranger it would id the ecu and i could get a virtual read, but when i tried to read or write to the ecu i got communication error after the part where it attempts to patch the ecu
the details of log is below
[Read] PID: 019 (Ford Siemens Continental SID209 [EB3A/GB3A] TC1797 CAN (BETA))
[15:34:06]: Selected protocol #019.
[15:34:06]: Selected interface: J2534.
[15:34:07]: Connecting...
[15:34:08]: Identify...
VIN: 6FPPXXMJ2PJA53911
ECU: CONTI_SID209_FRY_C00
Serial: 000882790861
Part#: GB3G-12A650-BB
HW: GB3A-12B684-CA
SW#: DS-GB3G-12A650-AAE
SW: GB3G-14C204-AJM
[15:34:11]: ECU isn't patched.
[15:34:12]: Downloading data from server...
Error: Reading from ECU.
Which j2534 are you using? I did a few of these Rangers, and many Transits, all was fine.
Re: SID 209
Posted: Thu Jul 09, 2020 9:34 am
by Thanakrit
Hello, please recommend me to convert a Ford vbf file to bin
Re: SID 209
Posted: Thu Jul 09, 2020 11:19 am
by Raf TGFlash
Thanakrit wrote: ↑Thu Jul 09, 2020 9:34 am
Hello, please recommend me to convert a Ford vbf file to bin
What do you mean by that?
Re: SID 209
Posted: Wed Jul 15, 2020 6:15 am
by BomB Tuner
How long time is the protocol 019 (Ford SID209) to be able to read / write all HW?
Because when my car still can't read and write from the ECU. Only virtual read and identify.
Thanks.
Re: SID 209
Posted: Wed Jul 15, 2020 9:25 am
by Raf TGFlash
BomB Tuner wrote: ↑Wed Jul 15, 2020 6:15 am
How long time is the protocol 019 (Ford SID209) to be able to read / write all HW?
Because when my car still can't read and write from the ECU. Only virtual read and identify.
Can you please post idents from your car here
Re: SID 209
Posted: Thu Jul 16, 2020 2:17 pm
by BomB Tuner
Raf TGFlash wrote: ↑Wed Jul 15, 2020 9:25 am
BomB Tuner wrote: ↑Wed Jul 15, 2020 6:15 am
How long time is the protocol 019 (Ford SID209) to be able to read / write all HW?
Because when my car still can't read and write from the ECU. Only virtual read and identify.
Can you please post idents from your car here
[Read] PID: 019 (Ford Siemens Continental SID209 [EB3A/GB3A] TC1797 CAN (BETA))
[21:04:28]: Selected protocol #019.
[21:04:28]: Selected interface: J2534.
[21:04:40]: Connecting...
[21:04:45]: Identify...
VIN: MNBLMF080JW941835
ECU: CONTI_SID209_FRK_900
Serial: 000182930765
Part#: EB3G-12A650-GF
HW: EB3A-12B684-DC
SW#: DS-EB3G-12A650-CG
SW: EB3G-14C204-FAB
Error: Reading from ECU.