Were you able to resolve the issue? Can support tell us what was the issue?Thanakrit wrote: ↑Wed Jun 17, 2020 1:47 amI'm sorry, I mistype "Can't write It damages to the ECU. "IDs you listed are supported. Please contact [email protected] with *.debuglog from Users/.../Documents/TGFlash/logs.
We do not see any unresolved inquiries at the moment. Please also explain what is "han", we couldn't translate that.
I will send information to [email protected] To analyze the cause
SID 209
Re: SID 209
-
- Posts: 1
- Joined: Wed Jun 24, 2020 10:31 pm
Re: SID 209
Will also be interested if and how this was resolved
- Raf TGFlash
- Posts: 36
- Joined: Wed Jun 10, 2020 7:17 pm
Re: SID 209
Every individual issue has its own reasons and solutions, so no general answer can be given.
If, for any reason, writing with 019 failed (battery voltage, cable disconnect, whatever else...), you need to perform "Back to stock" with original VBF to return ECU to original state and, after that, start writing with your file again.
Re: SID 209
Guys i tried doing a sid 209 in a ford ranger it would id the ecu and i could get a virtual read, but when i tried to read or write to the ecu i got communication error after the part where it attempts to patch the ecu
the details of log is below
[Read] PID: 019 (Ford Siemens Continental SID209 [EB3A/GB3A] TC1797 CAN (BETA))
[15:34:06]: Selected protocol #019.
[15:34:06]: Selected interface: J2534.
[15:34:07]: Connecting...
[15:34:08]: Identify...
VIN: 6FPPXXMJ2PJA53911
ECU: CONTI_SID209_FRY_C00
Serial: 000882790861
Part#: GB3G-12A650-BB
HW: GB3A-12B684-CA
SW#: DS-GB3G-12A650-AAE
SW: GB3G-14C204-AJM
[15:34:11]: ECU isn't patched.
[15:34:12]: Downloading data from server...
Error: Reading from ECU.
the details of log is below
[Read] PID: 019 (Ford Siemens Continental SID209 [EB3A/GB3A] TC1797 CAN (BETA))
[15:34:06]: Selected protocol #019.
[15:34:06]: Selected interface: J2534.
[15:34:07]: Connecting...
[15:34:08]: Identify...
VIN: 6FPPXXMJ2PJA53911
ECU: CONTI_SID209_FRY_C00
Serial: 000882790861
Part#: GB3G-12A650-BB
HW: GB3A-12B684-CA
SW#: DS-GB3G-12A650-AAE
SW: GB3G-14C204-AJM
[15:34:11]: ECU isn't patched.
[15:34:12]: Downloading data from server...
Error: Reading from ECU.
Re: SID 209
Which j2534 are you using? I did a few of these Rangers, and many Transits, all was fine.andi1547 wrote: ↑Mon Jun 29, 2020 3:15 amGuys i tried doing a sid 209 in a ford ranger it would id the ecu and i could get a virtual read, but when i tried to read or write to the ecu i got communication error after the part where it attempts to patch the ecu
the details of log is below
[Read] PID: 019 (Ford Siemens Continental SID209 [EB3A/GB3A] TC1797 CAN (BETA))
[15:34:06]: Selected protocol #019.
[15:34:06]: Selected interface: J2534.
[15:34:07]: Connecting...
[15:34:08]: Identify...
VIN: 6FPPXXMJ2PJA53911
ECU: CONTI_SID209_FRY_C00
Serial: 000882790861
Part#: GB3G-12A650-BB
HW: GB3A-12B684-CA
SW#: DS-GB3G-12A650-AAE
SW: GB3G-14C204-AJM
[15:34:11]: ECU isn't patched.
[15:34:12]: Downloading data from server...
Error: Reading from ECU.
Re: SID 209
Hello, please recommend me to convert a Ford vbf file to bin
- Raf TGFlash
- Posts: 36
- Joined: Wed Jun 10, 2020 7:17 pm
Re: SID 209
What do you mean by that?
-
- Posts: 5
- Joined: Mon Jul 13, 2020 8:39 am
Re: SID 209
How long time is the protocol 019 (Ford SID209) to be able to read / write all HW?
Because when my car still can't read and write from the ECU. Only virtual read and identify.
Thanks.
Because when my car still can't read and write from the ECU. Only virtual read and identify.
Thanks.
- Raf TGFlash
- Posts: 36
- Joined: Wed Jun 10, 2020 7:17 pm
Re: SID 209
Can you please post idents from your car hereBomB Tuner wrote: ↑Wed Jul 15, 2020 6:15 amHow long time is the protocol 019 (Ford SID209) to be able to read / write all HW?
Because when my car still can't read and write from the ECU. Only virtual read and identify.
-
- Posts: 5
- Joined: Mon Jul 13, 2020 8:39 am
Re: SID 209
Raf TGFlash wrote: ↑Wed Jul 15, 2020 9:25 amCan you please post idents from your car hereBomB Tuner wrote: ↑Wed Jul 15, 2020 6:15 amHow long time is the protocol 019 (Ford SID209) to be able to read / write all HW?
Because when my car still can't read and write from the ECU. Only virtual read and identify.
[Read] PID: 019 (Ford Siemens Continental SID209 [EB3A/GB3A] TC1797 CAN (BETA))
[21:04:28]: Selected protocol #019.
[21:04:28]: Selected interface: J2534.
[21:04:40]: Connecting...
[21:04:45]: Identify...
VIN: MNBLMF080JW941835
ECU: CONTI_SID209_FRK_900
Serial: 000182930765
Part#: EB3G-12A650-GF
HW: EB3A-12B684-DC
SW#: DS-EB3G-12A650-CG
SW: EB3G-14C204-FAB
Error: Reading from ECU.